Husky Hydraulic Valve Repair

Moog Servo Valves – Moog Proportioning valves

 

With over 25 years of knowledge repairing Husky Moog servo and Husky Moog proportioning valves, you can rely on us to fully restore your Husky servo valve to OEM specifications and return it in a very timely manner.  We service all Moog and Hydrolux servo and proportional valves for Husky Injection Molding machines.

  • FREE quotes for repairs
  • Service most all servo & proportional valve manufacturers
  • Provide stand alone amplifier and on board electronic repair
  • Quick turnaround, minimizing downtime
  • Dynamic performance testing capabilities
  • Backed by an industry leading warranty

Our Repair Procedures:

  • Inspection and evaluation on test stand
  • Dissasembly of valve into component parts.
  • Every part is cleaned.
  • Torque motor is dismantled down to wires and magnets.
  • Failed parts are replaced with OEM components.
  • Body spool assembly is evaluated.  Seals and filters are replaced.
  • Torque motor and body are reassembled and tested.

Materials:

H-13 – High strength pre-hardened tool steel that is nitrided to through-harden.  Good for most general purpose molding applications.

D-2 – High carbon/high chrome tool steel with good wear resistance.  Good for most general purpose molding applications with up to 10% glass fillers.

9V – Tool steel with 9% vanadium carbide.  Excellent wear resistance.  Good for high wear, non corrosive applications

S90V – Tool steel with 9% vanadium carbide and 14% chromium.  Good for high wear/high corrosive applications.

Telar also supplies 4 piece valves, ball checks, 3 piece locking ring design and smear tips. Telar is a leading supplier with a very large inventory of screws, barrels, screw tips, end caps, nozzles and nozzle tips.  We have inventory on many of the most popular injection molding machine makes and models.  Same day shipping available on orders received by 5:00 pm EST.

In addition to our huge inventory inventory of Engel screws and Engel barrels we have ready to ship, Telar can repair your existing screw and reline your barrel.  Our repair services will get your existing screw and barrel to OEM specifications at a great cost savings.  Speak with one of our engineers to decide if repair is a good alternative.

Please visit our main website at www.telarcorp.com for more great savings on pneumatic conveying components and auxiliary equipment including loaders, dryers, chillers, temperature controls, hot runner controls, granulators and additive feeders.

Morris Coupling - Telar Corp.Aluminum Lateral Wye - Pneumatic ConveyingAluminum Round Tubing - Pneumatic ConveyingCam Locks - Cam and Groove Couplings

Telar Loader - Injection MoldingTemptek Air-Cooled Chiller

Shini Granulator - Telar Corp.Athena Hot Runner Control Module - RMA-15

Dri-Air Dryer with Hopper on Stand

Temptek Mold-Temperature-Control-Unit - Telar Corp.

Incline Conveyor - Telar Corp.

Accu-Feed Additive Feeder - Telar Corp.

Engel Injection Machine Model No.
ES30, ES55, ES80, ES85, ES100, ES150, ES200, ES250, ES300, ES400, ES450, ES550, ES725, ES880, ES1050, ES1100, ES1300, ES1400, ES1500, ES1750, ES2000, ES2750, ES3500, ES7000, ES7050