Autoload Dual Loader w/ Reinforced Hopper
Proportioning Loader
AUTOLOAD AL-1555 reinforced dual proportioning loader eliminates layering.
Mounts directly to molding machine – Load 2 materials – from gaylord/drying hopper and granulator
Use as a Single Material, or Proportional Loader – control regrind percentage – uniform mix
1/8″ thick reinforced hopper is suitable for glass filled or other abrasive material.
Includes everything you need – hopper with filter, sight tube assembly with sensor, control assembly with regulator and solenoid, mounting flange, (2)10 ft. of 1-1/4″ material hose, (2) air line tubing and (2) pick up wand with venturi
Low maintenance (no motors or brushes) very quiet and efficient – only 30″ in height.
AL-1555-OWW-R $2,675
AL-1555-OWW-R (to load two materials)
Autoload Air Loaders
-
#1 Selling Venturi Loader – Thousands in Production, Save on Complete Systems and Spare Parts
-
Mounts Directly to Molding Machine – In Stock – Factory Warranty and Technical Support
-
Available as Single Material, or Proportional Loader also Cleanroom and Remote Loading
$1,755
Clean Room Loader – Remote Exhaust
CL-1525-OW
$1,645
Reinforced Hopper – For Abrasive Material
AL-1525-OW-R
$2,675
Proportional Loader w/ Reinforced Hopper
AL-1555-OWW-R
Autoload Spare Parts – All Models
Std. Wand – $200
CPM Wand – $460
P/N: WN-6125 (CPM)
Accelerator $125
Accelerator – CPM $420
P/N: AC-5125 (CPM)
$185
Level Sensor
P/N: LS-1000
$680
Single Control Unit
CU-1000
$1,290
Proportional Control
CU-2000
$475
Overfill/Low Level Alarm
OA-1000
$440
Collector Box
P/N: 81900
$625
Collector Box
CB-2500
$90
Grinder Spike
GS-1000
$95
Mounting Plate
P/N: MP-1000
$2.00 / ft
Flex Hose 1.25″
P/N: MTH-125
$22
Filter Hold Down Assy.
FHDA-1000
Autoload Spare Parts (AL-1525) (AL-1555) (FL-1525) (FL-1555)
$375
Magnet Assembly
P/N: MG-3500
$525
AL-1525 Hopper
HP-1525-KFS
$890
Reinforced 1525
HP-1525-RKFS
$798
AL-1555 Hopper
HP-1555-KFS
$995
Reinforced 1555
HP-1555-RKFS
$740
Sensor/Sight Glass Assembly
SSGS-1000
$63
Sight Glass
SG-1000
$4.25
Sight Glass Seal
SGS-1000
$40
Filter for AL-1525
P/N: AL-AF-15
$525
Filter Top Assembly
FLTA-1000
$92
Filter Bag
F-1000
$31
Filter Top Screen
FS-1000
$22
Filter Hold Down Assy.
FHDA-1000
$52
Hopper Lid
HP-LID
$125
Hopper Cone Assembly
P/N: HP-CONE-ASSY
$8
Hopper Cone Gasket – Red
HP-CG-Red
$25
Cone Gasket – White
HP-CG-White
$9.50
Filter Top Gasket
F-Gasket-Red
$112
Top End Bell
TEB-1000
$4.25
Top End Bell O Ring
SG-ORING-TOP
$117
Bottom End Bell
P/N: BEB-1000
$4.25
Top End Bell O Ring
SG-ORING-BOT
$55
Sensor Bracket
SB-1000
$31
Sight Glass Support Rod
ROD-1000
Autoload Spare Parts Pricing – All Models
| Part # | Description | Price |
|---|---|---|
| LS-1000 | Level Sensor | $185.00 |
| MG-3500 | Magnet Assembly | $375.00 |
| SG-1000 | Sight Glass Tube | $63.00 |
| SGS-1000 | Sight Glass Seal | $4.25 |
| TEB-1000 | Top End Bell | $112.00 |
| ORT-1000 | Top End Bell O-Ring | $4.25 |
| ORB-1000 | Bottom End Bell O-Ring | $4.25 |
| Rod-1000 - Used | Support Rod | $12.00 |
| Rod-1000 | Support Rod | $31.00 |
| BEB-1000 | Bottom End Bell | $117.00 |
| WN-6125 | Wand Assembly 1.25" | $200.00 |
| WN-6125-CPM | CPM Wand 1.25" | $460.00 |
| WN-6150 | Wand Assembly 1.50" | $228.00 |
| WN-6150-CPM | CPM Wand 1.50" | $485.00 |
| WN-Spike | Wand Spike | $30.00 |
| AC-5125 | Accelerator 1.25" | $125.00 |
| AC-5125 - Super | Super Accelerator 1.25" | $135.00 |
| AC-5125-CPM | Accelerator CPM 1.25" | $430.00 |
| AC-5150 | Accelerator 1.50" | $140.00 |
| AC-5150 - Super | Super Accelerator 1.50" | $160.00 |
| AC-5150-CPM | Accelerator CPM 1.50" | $430.00 |
| AC-O Ring | Accelerator O-Ring | $4.25 |
| CU-1000 | Single Control Unit | $680.00 |
| CU-2000 | Dual Control Unit | $1,290.00 |
| OA-1000 | Overfill Timer Control | $475.00 |
| CB-2500 | Single Collector Box | $625.00 |
| 81900 | Single Collector Box | $440.00 |
| CB-2502 | Dual Collector Box | $635.00 |
| 81910 | Dual Collector Box | $460.00 |
| GS-1000 | Grinder Spike | $90.00 |
| MP-1000 | Mounting Plate | $95.00 |
| HP-1525KFS | 1525 Hopper Only | $525.00 |
| HFA-1525 | Hopper/Filter Assembly | $895.00 |
| HP-1525RKFS | 1525 Reinforced Hopper | $890.00 |
| RHFA-1525 | Reinforced Hopper Assy. | $1,090.00 |
| HP-1555KFS | 1555 Hopper Only | $798.00 |
| HFA-1555 | Hopper/Filter Assembly | $990.00 |
| RH-1555 | 1555 Reinforced Hopper | $742.00 |
| HP-1555RKFS | Reinforced Hopper Assy. | $995.00 |
| RES-HOP | Reservoir Hopper | $990.00 |
| SSGA-1525 | Sensor/Sight Glass Assy. | $740.00 |
| SSG-1NS | Sight Glass - No Sensor | $510.00 |
| SB-1000 | Sensor Bracket | $51.00 |
| SP-1000 | Sensor Plug | $24.00 |
| SEC-1000 | Sensor Extension Cable | $106.00 |
| SN-1000 | Sensor Nut | $2.25 |
| HP-Lid | Hopper Lid | $52.00 |
| FHDA-1000 | Filter Hold Down Assy. | $22.00 |
| HP-Foot | Hopper Foot | $6.00 |
| HP-Stem | Hopper Stem | $10.00 |
| HP-E-Clip | Hopper E Clip | $1.20 |
| HP-Knob | Hopper Knob | $6.00 |
| AF-15 | Filter (PA-1857) | $40.00 |
| HP-CA-Red | Cone Assembly - Red | $125.00 |
| HP-CA-White | Cone Assembly - White | $138.00 |
| HP-CG-Red | Cone Gasket - Red | $8.00 |
| HP-CG-White | Cone Gasket - White | $25.00 |
| FS-1000 | Filter Screen | $31.00 |
| F-Gasket-Red | Filter Gasket - Red | $9.50 |
| FB-1000 | Filter Top and Bag Assy. | $525.00 |
| F-1000 | Filter Bag | $92.00 |
| JR-REC | Junior Receiver | $850.00 |
| JRII-JF-15 | JR II Filter | $65.00 |
| JRII-MAG | Junior Magnet | $155.00 |
| MG-1000 | Junior Magnet | $235.00 |
| FHDA-1000 | Jr. Filter Hold Down Assy. | $22.00 |
| HP-Foot | Junior Hopper Foot | $6.00 |
| HP-Stem | Junior Hopper Stem | $10.00 |
| HP-E-Clip | Junior Hopper E Clip | $1.20 |
| HP-Knob | Junior Hopper Knob | $6.00 |
| JR-Rod | Junior Support Rod | $25.00 |
| SG-500 | Junior Sight Glass | $45.00 |
| JR-Seal | Junior Sight Glass Seal | $4.00 |
| JR-OR1000 | Junior Top O-Ring | $4.00 |
| JF-15 | Junior Filter (PA-1859) | $30.00 |
| JR-FL | Junior Filter Lid | $16.00 |
| JR-FS | Junior Screen | $20.00 |
| JR-FB | Junior Filter Bag | $80.00 |
| JR-Handle | Junior Handle | $78.00 |
| JR-Rod | Junior Threaded Rod | $7.00 |
| JR-Baffle | Junior Baffle Plate | $160.00 |
| JR-Tee | Junior Tee | $160.00 |
| JR-ORBE | Junior Bottom O-Ring | $4.25 |
| JR-SB | Junior Sensor Bracket | $56.00 |
| RL-DFA | RL Drum Filter Assembly | $774.00 |
| RL-Filter | Bag Filter for RL Drum | $57.00 |
| HG125 | 1.25" flex hose / ft. | $3.00 |
| HG150 | 1.50" flex hose / ft. | $4.00 |
| UP66 | 3/8" air tubing / ft. | $1.00 |
| 5720 | 1.25" Hose Clamp | $2.30 |
| 5720 | 1.25" Hose Clamp | $2.30 |
| 5732 | 2" Hose Clamp | $3.10 |
| Gauge | Air Gauge | $29.00 |
| BN-1000 | Bracket/Nut | $18.00 |
| CBV-1000 | Control Box w/valve | $347.00 |
| R-1000 | Regulator | $172.00 |
| SV-1000 | Solenoid Valve | $131.00 |
| CV-RS | Rocker Switch Cover | $12.10 |
| RC-C3 | Rocker Cover | $4.40 |
| SVC-1000 | Solenoid Valve Coil | $77.00 |
| CU-FR | CU-Female Receptacle | $33.00 |
| 3/8 - 90 SPL | 3/8-90 Degree Push Lock | $7.10 |
| 3/8 - SPL | 3/8 Straight Push Lock | $5.80 |
| CV-Bowl | Regulator Bowl | $77.00 |
Telar is a leading supplier of front end components at the industries lowest prices. Huge inventory of screws, barrels, screw tips, end caps, nozzles and nozzle tips. We have inventory on many of the most popular injection molding machine makes and models. Same day shipping available on orders received by 5:00 pm EST. Rush orders 1-2 weeks.
Please visit our main website at www.telarcorp.com for more great savings on pneumatic conveying components and auxiliary equipment including loaders, dryers, chillers, temperature controls, hot runner controls, granulators and additive feeders.
