Made in USA

Temptek  1 Ton Chiller – Model CF-1A

Features

Refrigerant Circuit

  • HFC-134A refrigerant
    – Non-Ozone depleting
    – Low global warming impact
  • Hermetic Compressor
  • Air-cooled condenser with finned tubes
  • Propeller fan(s) induced air flow
  • Refrigerant sight glass with moisture indicator
  • Filter-drier
  • Thermostatic expansion valve

Coolant Circuit

  • Insulated non-ferrous reservoir
    (tank lid is standard on this model)
  • Reservoir level sight glass
  • Positive displacement pump
  • Standard NPT process fittings

Electrical

  • Nema 1 control cabinet
  • Process pump motor starter
  • Compressor contactor
  • Factory installed 10′ power cord

System Limit Devices

  • High refrigerant pressure
  • Low refrigerant pressure
  • Process pump motor overload

Frame Construction

  • Stainless steel sheet metal
  • Lift-off top cover panel
  • Compact physical size
  • Casters for portability
  • Designed for indoor installation

Warranty

  • 1 year covering parts and labor

Temptek 1 Ton Chiller Model CF-1A

MODEL CF-1A

(230/1/60)

$6,195

Specifications

Model CF-1A


Capacity
  • Tons : 1
  • kW : 3.5

Compressor

  • HP : 1
  • Type : Hermetic Reciprocating

Process Pump

  • HP : 1/2
  • GPM : 2.4
  • PSI : 60
  • Type : Positive Displacement
  • Construction : Brass
  • Automatic Low Flow Bypass: : Standard

Air-Cooled Condenser

  • Type : Fan
  • CFM : 7100
  • (3) Ambient : 90°F

Refrigerant

  • Type : R-134A

 

Full Load Amperage

  • 230/1/60 : 15

Reservoir Capacity

  • Holding : 4 gal
  • Lid : Standard
  • Auto Make-Up : Optional

Process Connections

  • To Process : 1/2″
  • From Process : 1/2″
  • Make-Up : 1/2″

Dimensions

  • Height : 37″
  • Width : 19″
  • Depth : 25″

Weight 

  • Shipping : 345 lbs

 

 

 

Specification Notes:

  • 1. Since product innovation and improvement is our constant goal, all features and specifications are subject to change without notice or liability. Selection of certain optional features may change listed specifications.
  • 2. Tons capacity at 12,000 BTU/ton per hour @ 50°F LWT @ ” 115°F condensing temperature. Capacities may be +/- 5% as reserved by the compressor manufacturer. Operating at temperatures below 50° will reduce chiller capacity. The minimum recommended operating temperature when no glycol is used is 48°F.
  • 3. Design ambient conditions. Loss of capacity and/or difficulty operating will occur at higher ambients. Minimum recommended ambient is 60°F.
  • 4. Full load amps are higher than run load amps and must be used for sizing disconnects and supply wiring.
  • 5. Approximate unit weight crated for shipment.

Temptek CF Series Chiller Control

CF Series Control

  • Continuous To Process temperature display
  • Selectable Setpoint temperature display
  • Illuminated On / Off power switch
  • Bright, easy-to-read LED temperature display window
  • Basic chiller diagnostics with Refrigeration Fault light
  • Refrigeration Fault light
  • Machine Status with Compressor and Capacity Control indicating lights

Options


Call or email for complete list of options pricing

Refrigerant Circuit
  • Air Inlet filter and protection screen
  • Compressor CPR Valve (Setpoints above 65°F
Pressure Gauges
  • Refrigerant High Pressure
  • Refrigerant Low Pressure
  • Coolant Pressure

Electrical

  • UL listed electrical sub panel

Coolant Circuit

  • Overhead Piping Kit
  • Reverse Flow … Gravity Return to Open Tank
  • Process Line Shut Off Valves
  • Reservoir Water Make-Up Valve

Warranty

  • Extended Compressor Warranty

Frame Construction

  • Enclosure Panels
Options Pricing 1T and 1.5 T
DescriptionPrice
Enclosure Panels & Condenser Screen$500
Condenser Screen$155
Overhead Piping Kit$225
Reverse Flow Circuit$100
CCPR Valve$160
Automatic Water Make-Up$185
Process Shut-Off Valves$90
Refrigerant Pressure Gauges$115
Hot Gas Bypass$160